LSZH series BX C 10

0.6/1kV

Flexible Cu 1.5 up to 300mm²

XLPE 90°C / LSZH

Shield: 10% coverage

Variable frequency drive motor feed (VFD) in closed environments with a high concentration of people or in locations with equipment sensitive to exposure to corrosive gases. For Alternating Current (50/60Hz), for three-phase systems (380/190V) and systems with voltages up to 1kV. Installed in aerial trays, gutters or conduits, under roof or ladder under roof, buried in ducts or directly buried.

Features

Temperature rating: 90ºC (operating), 130ºC (overload), 250ºC (short circuit)
Voltage rating: 600/1000V AC, maximum 1200V AC / 1500V DC
Construction requirements: As per IRAM 2178-1 – IEC 60502-1
Conductor requirements: As per IRAM NM 280 – IEC 60228
Conductor: Annealed electrolytic copper - Flexible stranding class 5
Insulation: XLPE (Crosslinked polyethylene)
Bedding: LSZH
Shield: Composed by a concentric conductor made of copper tape and/or copper wires, with a shilelding cross-section of 10% of the phase of each cable model
Sheath: LSZH-HFFR (Low Smoke Zero Halogen - Halogen Free Flame Retardant), flame retardant, sunlight, and oil resistant
Fire requirements: As per ICEA T 30-520
Standard for halogen absence and corrosive gases: As per IEC 60754-1/2
Smoke transparency requirements: As per IEC 61034-1/2
Toxicity standard: As per NES 713 – CEI 20.37
Oils requirements: As per ICEA S 73-532
Outdoors requirements: As per UL 2556 (UV rays)
Water behaviour requirements: Suitable AD7 (Occasional water submersion)

Electromagnetic interference protection

Fire-retardant

Halogen free

Low smoke

Mineral oil resistant

UV resistant

Identification

	Standard
	Sheath	Conductors
3 Conductors

Instalation

Installation temperature

Over conductors

Minimum bend radius

Download PDF

ELECTRICAL CHARACTERISTICS

Resistances, reactance and intensity of admissible currents

Nominal cross-section sq (mm²)	Nominal cross-section Concentric conductor sq mm	Electrical resistance at 20°C in C.C. Ohm/km	Electrical resistance at 20°C in C.C. Concentric conductor Ohm/km	Electrical resistance at 90°C in C.C. Ohm/km	Electrical resistance at 90°C in C.C. Concentric conductor Ohm/km	Inductive reactance at 50Hz (Ohm/Km)	Current-carrying capacity of cables in free air at 40°C as per IEC 364-5-523. Cables displayed in Cable Ladder or perforated tray. (Ampere)	Current-carrying capacity of cables directly buried at 25°C soil temperature and soil thermal resistance of 1 km/W as per IEC 364-5-523. (Ampere)
Nominal cross-section sq (mm²)	Nominal cross-section Concentric conductor sq mm	Electrical resistance at 20°C in C.C. Ohm/km		Electrical resistance at 90°C in C.C. Ohm/km
1.5	0.5	13.3	39	16.96	49.73	0.1	20	28
2.5	0.5	7.98	39	10.18	49.73	0.093	28	37
4	0.5	4.95	39	6.31	49.73	0.088	36	48
6	0.75	3.3	26	4.21	33.15	0.083	47	61
10	1	1.91	19.5	2.44	24.86	0.078	65	83
16	1.5	1.21	13.3	1.54	16.96	0.075	86	107
25	2.5	0.78	7.98	0.99	10.18	0.075	109	141
35	4	0.554	4.95	0.707	6.31	0.073	137	168
50	6	0.386	3.3	0.493	4.21	0.073	166	199
70	10	0.272	1.91	0.348	2.44	0.071	213	243
95	10	0.206	1.91	0.264	2.44	0.07	257	293
120	16	0.161	1.21	0.207	1.54	0.07	299	333
150	16	0.129	1.21	0.167	1.54	0.07	345	373
185	25	0.106	0.78	0.138	0.99	0.07	394	425
240	25	0.0801	0.78	0.106	0.99	0.069	465	493
300	35	0.0641	0.554	0.086	0.707	0.069	537	559

DIMENSIONS & WEIGHT

Cable Formation, N° Cond. x cross-section (mm²)	Diameter under shield mm	External diameter mm	Weight kg/km	Code
3 x 1.5	9	12.3	213	BX 0315 C/10
3 x 2.5	9.3	12.7	239	BX 0325 C/10
3 x 4	10.3	13.6	300	BX 0340 C/10
3 x 6	11.7	15	382	BX 0360 C/10
3 x 10	14	17.3	551	BX 3100 C/10
3 x 16	16	19.4	749	BX 3160 C/10
3 x 25	19.5	22.9	1,105	BX 3250 C/10
3 x 35	21.7	25.1	1,431	BX 3350 C/10
3 x 50	25.1	28.5	1,930	BX 3500 C/10
3 x 70	31.3	35.1	2,746	BX 3700 C/10
3 x 95	35.6	39.6	3,520	BX 3950 C/10
3 x 120	39.1	43.3	4,427	BX 31200 C/10
3 x 150	45.1	49.7	5,551	BX 31500 C/10
3 x 185	49	53.8	6,706	BX 31850 C/10
3 x 240	56.3	61.3	8,717	BX 32400 C/10
3 x 300	62.7	68.1	10,849	BX 33000 C/10