series FM

0.6/1kV

Flexible Cu 1 up to 4mm²

Up to 48 Conductors

XLPE 90°C / LSZH

Control, signalling, measuring and protective equipment, electric controls of home installations. Use in closed environments with a high concentration of people (airports, hospitals, trains, cinemas, shopping centers, tunnels) and in control rooms with electronic equipment sensitive to the exposure of corrosive gases. Installed in conduits, trays, cable ladders, in direct open air or indoors, buried in a trench or in ducts.

Features

Temperature rating: 90ºC (operating),130ºC (overload) and 250ºC (short circuit)
Voltage rating: 600/1000V AC, maximum 1200V AC / 1500V DC
Construction requirements: As per IRAM 2178-1 – IEC 60502-1
Conductor requirements: As per IRAM NM 280 – IEC 60228
Conductor: Annealed electrolytic copper - Flexible stranding class 5
Insulation: XLPE (Cross-linked polyethylene)
Sheath: LSZH-HFFR (Low Smoke Zero Halogen - Halogen Free Flame Retardant), fire-retardant; sunlight and oils resistant
Fire requirements: As per IEC 60332-3-24
Standard for halogen absence and corrosive gases: As per IEC 60754-1/2
Smoke transparency requirements: As per IEC 61034-1/2
Toxicity standard: As per NES 713 – CEI 20.37
Oils requirements: As per ICEA S 73-532
Outdoors requirements: As per UL 2556 (UV rays)
Water behaviour requirements: Suitable AD7 (Occasional water submersion)

Fire-retardant

Halogen free

Low smoke

Mineral oil resistant

UV resistant

Water immersion

Identification

	Standard
	Sheath	Conductors
Multiconductors		alphanumeric identification

Instalation

Installation temperature

Over conductors

Minimum bend radius

Constructive variants

The information provided corresponds to the standard version, and different alternatives of insulation and / or covering materials can be used upon request.

Download PDF

ELECTRICAL CHARACTERISTICS

Resistances and intensity of admissible currents

Nominal cross-section sq mm²	Electrical resistance at 20ºC in C.C Ohm/km	Electrical resistance at 90ºC in C.A. Ohm/km	Current-carrying capacity in free air. At 40°C as per IEC 364-5-523. Formations in perforated trays or ladder type. (Ampere)
Nominal cross-section sq mm²	Electrical resistance at 20ºC in C.C Ohm/km	Electrical resistance at 90ºC in C.A. Ohm/km	2x	4x	7x	10x	19x	30x	48x
1	19.5	24.86	--	--	--	--	--	--	--
1.5	13.3	16.96	23	20	16.1	11.5	11.5	10.4	8.1
2.5	7.98	10.18	31	28	21.7	15.5	15.5	14.0	10.9
4	4.95	6.31	43	36	30.1	21.5	21.5	19.4	--

As from seven-conductors, we’ve additionally applied the correction factor for more than three conductors the chart 310.15 (B)(3)(a) of the NFPA70.

DIMENSIONS & WEIGHT

Cable formation N° Cond. x cross-section (mm²)	External diameter mm	Weight kg/km	Code
2x1	8.2	86	FM 0210
3x1	8.6	98	FM 0310
4x1	9.3	114	FM 0410
5x1	10.0	133	FM 0510
7x1	10.8	160	FM 0710
10x1	14.2	235	FM 1010
12x1	14.6	262	FM 1210
14x1	15.3	291	FM 1410
19x1	16.8	362	FM 1910
24x1	19.4	444	FM 2410
30x1	20.5	523	FM 3010
37x1	22.0	617	FM 3710
48x1	25.0	772	FM 4810
2x1.5	8.7	102	FM 0215
3x1.5	9.2	117	FM 0315
4x1.5	9.9	138	FM 0415
5x1.5	10.7	163	FM 0515
7x1.5	11.6	199	FM 0715
10x1.5	15.2	288	FM 1015
12x1.5	15.7	324	FM 1215
14x1.5	16.4	362	FM 1415
19x1.5	18.1	457	FM 1915
24x1.5	20.9	562	FM 2415
30x1.5	22.1	668	FM 3015
37x1.5	23.8	795	FM 3715
48x1.5	27.1	1001	FM 4815
2x2.5	9.6	132	FM 0225
3x2.5	10.1	155	FM 0325
4x2.5	11.0	185	FM 0425
5x2.5	11.9	221	FM 0525
7x2.5	12.9	275	FM 0725
10x2.5	16.9	391	FM 1025
12x2.5	17.5	445	FM 1225
14x2.5	18.3	502	FM 1425
19x2.5	20.2	642	FM 1925
24x2.5	23.5	795	FM 2425
30x2.5	24.9	956	FM 3025
37x2.5	26.8	1146	FM 3725
48x2.5	30.9	1468	FM 4825
2x4	10.7	175	FM 0240
3x4	11.3	210	FM 0340
4x4	12.3	254	FM 0440
5x4	13.3	306	FM 0540
7x4	14.5	387	FM 0740
10x4	19.1	542	FM 1040
12x4	19.7	623	FM 1240
14x4	20.7	709	FM 1440
19x4	22.9	918	FM 1940
24x4	26.7	1143	FM 2440
30x4	28.5	1400	FM 3040
37x4	30.8	1687	FM 3740