series MH

600 Volt

Cu 14 AWG up to 750 MCM

XLPE 90°C / LSZH

ICEA S 95-658

Fixed power distribution networks in closed environments with a high concentration of people (airports, hospitals, trains, cinemas, shopping malls, tunnels) and in control rooms with electronic equipment sensitive to exposure to corrosive gases. For Alternating Current (60Hz), for single-phase systems (110V), three-phase systems (190/210V) and systems with voltages up to 600V. Installed in conduits, trays, cable ladders, in direct open air or indoors, buried in a trench or in ducts.

Features

Temperature rating: 90ºC (operating), 130°C (overload), 250°C (short circuit)
Voltage rating: 600V AC
Construction requirements: As per ICEA S 95-658
Conductor requirements: As per ASTM B172 to B174
Conductor: Annealed electrolytic copper; flexible
Insulation: XLPE (crosslinked polyethylene)
Sheath: LSZH-HFFR (Low Smoke Zero Halogen - Halogen Free Flame Retardant) fire-retardant; sunlight and mineral-oil resistant.
Fire requirements: As per ICEA T 30-520
Standard for halogen absence and corrosive gases: As per IEC 60754-1/2
Smoke transparency requirements: As per IEC 61034-1/2
Oils requirements: As per ICEA S 73-532
Outdoors requirements: As per UL 2556 (UV rays)
Water behaviour requirements: Suitable AD7 (Occasional water submersion)

Fire-retardant

Halogen free

Low smoke

Mineral oil resistant

UV resistant

Water immersion

Identification

	Standard
	Sheath	Conductors
1 Conductor
2 Conductors
3 Conductors
4 Conductors

Instalation

Installation temperature

Over conductors

Minimum bend radius

Download PDF

ELECTRICAL CHARACTERISTICS

Resistances, reactance and intensity of admissible currents

Conductor’s gauge (AWG)	Flexible class conductors. Electrical resistance at 20°C en D.C. (Ohm/km)		Flexible class conductors. Electrical resistance in C.C. at 90°C (Ohm/km)		Reactancia inductiva a 60Hz (Ohm/Km)					Current-carrying capacity (6)
					1 Conductor (1)	Unipolar (2)	Unipolar (3)	Multiconductor (4)	4 Conductors (5)	Current-carrying capacity (6)
	1 Conductor	Multiconductor	1 Conductor	Multiconductor
14	8.6	8.77	10.97	11.19	0.136	0.179	0.121	0.098	0.105	25
12	5.41	5.52	6.9	7.04	0.127	0.171	0.113	0.092	0.099	30
10	3.409	3.48	4.35	4.43	0.119	0.163	0.105	0.086	0.093	40
8	2.144	2.19	2.73	2.79	0.118	0.162	0.104	0.09	0.097	55
6	1.37	1.4	1.75	1.78	0.11	0.154	0.096	0.084	0.091	75
4	0.863	0.88	1.1	1.12	0.105	0.149	0.09	0.08	0.087	95
2	0.545	0.556	0.696	0.709	0.1	0.144	0.086	0.077	0.084	130
1	0.43	0.439	0.549	0.56	0.104	0.148	0.09	0.078	0.085	145
1/0	0.344	0.351	0.44	0.448	0.101	0.145	0.087	0.076	0.083	170
2/0	0.274	0.279	0.351	0.358	0.098	0.142	0.084	0.074	0.081	195
3/0	0.217	0.221	0.278	0.284	0.096	0.139	0.081	0.072	0.08	225
4/0	0.172	0.175	0.222	0.226	0.094	0.137	0.079	0.071	0.079	260
250	0.147	0.15	0.19	0.194	0.097	0.141	0.083	0.072	0.079	290
300	0.123	0.125	0.16	0.163	0.095	0.139	0.08	0.071	0.078	320
350	0.105	0.107	0.138	0.14	0.094	0.138	0.079	0.07	0.078	350
400	0.0919	0.0937	0.121	0.124	0.093	0.136	0.078	0.07	0.077	380
450	0.0817	0.0833	0.109	0.111	0.091	0.135	0.077	0.069	0.076	405
500	0.0735	0.075	0.0991	0.1011	0.091	0.134	0.076	0.068	0.076	430

(1) Three single conductor cables displayed in flat, in contact with each other. (2) Three single conductor cables displayed in flat, separated by 1 diameter between each other. (3) Three single-conductor cables displayed in a trefoil in contact with each other. (4) Calculation of Inductive reactance valid for two-conductor, three-conductor, and five-conductor cables. (5) Calculation of Inductive reactance valid for four-conductor cables. (6) Current-carrying capacity of cables with up to three conductors, installed in ducts or directly buried, up to an ambient temperature of 30ºC, according to chart 310.15 (B)(16) of the NFPA 70. As from four-conductors, we’ve additionally applied the correction factor for more than three conductors from the chart 310.15 (B)(3)(a) of the NFPA70.

DIMENSIONS & WEIGHT

Cable Formation N° Cond. x gauge AWG/MCM	External diameter mm	Weight kg/km	Code
1 x 14	4.9	38	MH 0114
1 x 12	5.3	52	MH 0112
1 x 10	6.0	72	MH 0110
1 x 8	7.5	115	MH 0108
1 x 6	8.6	170	MH 0106
1 x 4	9.7	243	MH 0104
1 x 2	11.1	357	MH 0102
1 x 1	13.3	470	MH 0101
1 x 1/0	14.2	566	MH 11/0
1 x 2/0	15.5	710	MH 12/0
1 x 3/0	16.7	868	MH 13/0
1 x 4/0	18.9	1123	MH 14/0
1 x 250	19.9	1345	MH 1250
1 x 300	23.5	1582	MH 1300
1 x 350	24.4	1853	MH 1350
1 x 400	25.6	2073	MH 1400
1 x 500	28.0	2561	MH 1500
1 x 600	31.2	2974	MH 1600
1 x 700	33.1	3388	MH 1700
1 x 750	34.0	3604	MH 1750
2 x 14	9.0	116	MH 0214
2 x 12	9.9	152	MH 0212
2 x 10	11.2	207	MH 0210
2 x 8	15.1	363	MH 0208
2 x 6	17.1	512	MH 0206
2 x 4	22.4	858	MH 0204
2 x 2	25.8	1209	MH 0202
2 x 1	28.6	1489	MH 0201
2 x 1/0	30.5	1752	MH 21/0
2 x 2/0	33.0	2138	MH 22/0
2 x 3/0	35.4	2560	MH 23/0
2 x 4/0	39.8	3274	MH 24/0
2 x 250	41.9	3825	MH 2250
2 x 300	50.0	4816	MH 2300
2 x 350	51.8	5468	MH 2350
2 x 400	54.3	6078	MH 2400
2 x 500	59.1	7389	MH 2500
2 x 600	65.4	8701	MH 2600
3 x 14	9.5	138	MH 0314
3 x 12	10.5	184	MH 0312
3 x 10	11.9	256	MH 0310
3 x 8	16.0	444	MH 0308
3 x 6	18.2	640	MH 0306
3 x 4	23.7	1058	MH 0304
3 x 2	27.4	1512	MH 0302
3 x 1	30.4	1867	MH 0301
3 x 1/0	32.4	2215	MH 31/0
3 x 2/0	35.1	2727	MH 32/0
3 x 3/0	37.7	3288	MH 33/0
3 x 4/0	44.0	4376	MH 34/0
3 x 250	47.7	5307	MH 3250
3 x 300	53.3	6120	MH 3300
3 x 350	55.1	7026	MH 3350
3 x 400	57.9	7825	MH 3400
3 x 500	63.0	9565	MH 3500
3 x 600	71.4	11459	MH 3600
3 x 14+1x14	10.4	166	MH 0314 0114
3 x 12+1x12	11.5	224	MH 0312 0112
3 x 10+1x10	13.0	315	MH 0310 0110
3 x 8+1x10	16.6	493	MH 0308 0110
3 x 6+1x8	19.4	731	MH 0306 0108
3 x 4+1x8	25.1	1174	MH 0304 0108
3 x 2+1x6	28.3	1644	MH 0302 0106
3 x 1+1x6	30.8	1974	MH 0301 0106
3 x 1/0+1x6	32.5	2303	MH 31/0 0106
3 x 2/0+1x6	34.8	2789	MH 32/0 0106
3 x 3/0+1x4	37.7	3415	MH 33/0 0104
3 x 4/0+1x4	44.1	4520	MH 34/0 0104
3 x 250+1x4	47.7	5444	MH 3250 0104
3 x 300+1x3	53.3	6300	MH 3300 0103
3 x 350+1x3	55.1	7207	MH 3350 0103
3 x 400+1x3	57.9	8007	MH 3400 0103
3 x 500+1x2	63.0	9785	MH 3500 0102
3 x 600+1x2	71.4	11680	MH 3600 0102